19
20
Confirmation signal (Roger beep)
The confirmation signal is issued on releasing the
P
button. This signals to the caller that you have ended trans-
mission.
Selecting a channel
M
Activate Settings mode
+
or
,
,
P
Select the channel and confirm it
Channel
Frequency (MHz)
Channel
Frequency (MHz)
1
446.00625
5
446.05625
2
446.01875
6
446.06875
3
446.03125
7
446.08125
4
446.04375
8
446.09375
Searching for a channel
Signals are searched for in the eight channels in a continuous cycle.
SCAN
appears in the display. If an active channel
is detected, the channel search stops. Press the
P
button to enable radio communication.
Starting channel search
3 sec
SCAN
Start the channel search
Resuming search for a channel
+
or
,
Resume the channel search
Stopping channel search
M
Stop the channel search
Transmit ringing tone
The ringing tones indicate to other subscribers that you want to talk to them. A condition for this is that the other sub-
scribers are using the same channel.
C
Send the ringing tone
Monitor function
The Monitor function enables the search for weak signals on the channel currently set. If you receive an external signal,
switch to a free channel. Always communicate with other subscribers on a free channel to prevent interference.
M
and
+
Start monitoring the channel
M
End monitoring
Key lock
The key lock function prevents inadvertent modification of settings. When the key lock function is activated, the
−
icon appears in the display.
Activating
M
and
,
Activate the key lock
Deactivating
M
and
,
Deactivate the key lock
Setting the transmission power
The device is equipped with 2 transmission power options,
HI (= high) and LO (= low). The corresponding icon appears in the display.
2 x
M
Activate the programming mode
+
oder
,
,
P
Select HI or LO and confirm
5
In Case of Problems
Service hotline
Should problems arise with the walkie−talkies, please refer to the following information first. In the case of technical
problems, please contact our hotline within Switzerland under tel. 0900 00 1675 (cost with Swisscom at time of going to
print: CHF 2.60/min). In the case of claims under the terms of guarantee, contact your sales outlet. There is a 2 year
period of guarantee.
