10
Putting the Telephone into Operation
41
2
Putting the Telephone into Operation
Safety information
Attention:
It is essential to read the Safety Information in
Chapter 1 before starting up.
Checking the package contents
The package contains:
− a telephone
− a receiver
− a telephone connection
cable
− a helix cable
− a tabletop support
− an operating manual
− three batteries, AA 1.5 V alkaline
Connecting the receiver
Plug one end of the helix cable in the socket on the bottom end of the
receiver. Then plug the other end in the socket on the left−hand side of
the telephone.
Inserting the batteries
Insert the batteries before connecting the telephone to the telephone
network, paying careful attention to
correct polarity
.
Always use AA 1.5 V alkaline batteries.
Prior to inserting or replacing the batteries, ensure that the
telephone is disconnected from the telephone network.
Connecting the telephone
Connect the telephone connection cable enclosed to the telephone line
socket and the telephone socket on the rear of the telephone.
Mounting the tabletop support
If you want to have the telephone on a table, you must mount the table-
top support supplied. Insert the two clips in the slots provided for them
on the rear side.