Putting the Telephone into Operation
66
Wall installation
Feed the guide tabs (1) on the wall−mounting bracket (2) in the slots (3) on the underside of
the telephone. Slide the wall−mounting bracket 10 mm upwards until it audibly locks into place.
Drill a hole and insert a screw leaving about 5 mm of the screw projecting from the wall. Guide
the mounting hole (4) in the mounting bracket (2) over the screw and slide the telephone
downwards.
Caution:
Ensure there are no electrical lines, water pipes etc. in the wall where the
hole is drilled.
1
2
3
3
4
Turn the hook (5) in the receiver cradle so that the receiver can be placed on−hook.
5
5
5
5
5
Setting the language
The information on Page 73 explains how to set the telephone’s voice output and display
language when starting it up for the first time.
Setting the date and time
The information on Page 73 explains how to set the date and time on the telephone when
starting it up for the first time.
Setting the contrast
The information on Page 73 explains how to set the display contrast.
Setting the ringer tone
The information on Page 73 explains how to set the ringer tone.
