25
Emergency Calls
43
7
Emergency Calls
You can use the emergency call buttons to call the emergency services
exchange or contact persons in the event of an emergency.
There are several emergency services exchanges available. In
some countries, these may be subject to a charge.
You can also use the equipment as a private emergency call de-
vice within the family.
Storing emergency / one−touch dialling numbers
You can use the one−touch dialling buttons M1, M2 and M3 for normal
direct dialling or as memory locations for the emergency call function.
è
Lift the receiver
Initiate the programming function
ë
,
Enter the phone number
(max. 32 digits)
^
,
_
or
`
Press the one−touch dialling button to
be assigned the number
é
Entry is saved
You can insert photos or symbols under the transparent covers of the
3 one−touch dialling buttons to label them.
You cannot delete the phone numbers assigned to the one−touch
dialling buttons. The existing phone numbers are overwritten
when new numbers are assigned to them.
Starting emergency calls
è
or
Lift the receiver or activate handsfree
^
,
_
or
`
Press the one−touch dialling button
required
8
Answering Machine
Switching the answering machine on/off
G
Switch the answering machine on/off
The number of messages is indicated in the display. The indicator flashes
when new messages have been recorded.
Maximum recording time
The maximum recording time is 24 minutes. The maximum length of a
message is 2 minutes. When the memory capacity for new messages is
exhausted, no further messages are recorded.
Setting the number of rings (answering delay)
You can select 2 or 6 ringing tones or the
Tollsaver
(TS) setting for prere-
mote access free of charge. The free pre−remote access function enables
you to determine whether new messages have been left on your answer-
ing machine. The slide control is located on the underside of the phone.
If new message have been recorded on your answering machine,
your call is taken after 2 rings.
If no new messages have been recorded, the call is taken after 6
rings. End the call before the 6th ring. This means that no charges
ensue.
Call screening
You can listen to an incoming call without actually taking the call. Adjust
the volume using the Handsfree volume" slide control.
Taking a call being recorded
It is possible to take a call even if the answering machine has already be-
gun to take it. Recording of the message is stopped in this case.
è
Take the call
Record outgoing message
An outgoing message can be up to 60 seconds long.
Press and hold
x
Start the recording function
ð
Begin to speak your message after the
beep signal (min. 5 sec.)
Release
x
End the recording function
Checking the current outgoing message
x
Play the current outgoing message
G
Stop playback
The outgoing message is overdubbed when a new one is recorded.