switel DF1101, Руководство по эксплуатации

Страница: 4 / 20

2
Preparing the Telephone
4
Charging the batteries
Before the handset is used for the first time, insert it in the base/charging station for at least 24 hours.
When the handset is inserted in the base/charging station properly, you will hear an acoustic confirmation
signal and the charge control lamp lights up. The handset warms up during the charging process. This is
normal and does not represent a risk. Do not charge the handset with charging units from other
manufacturers.
The current
battery charge status is indicated in the display:
Full Half empty Low Empty
Setting the display language
Select a language (cf. "Menu Structure"):
Menü > Einstellungen > Mobilteil−Einst. > Sprache >... ( Menu > Settings > Set Handset > Language >...)
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 13 for the sequence of menu option selections.
Automatic answering
If this function is activated, an incoming call is taken when the handset is removed from the base station. This
function can be activated or deactivated via the menu. Refer to Page 14 for the sequence of menu option
selections.
Private branch exchanges
The information on Page 15 explains how to install your telephone in a private branch exchange.
Low−radiation (ECO mode) (single pack only)
When the handset is in the base station, the level of radiation is considerably lower than that
of standard DECT cordless telephones when in Standby mode. In talk mode, radiation is reduced
(depending on the distance between the handset and base station).
Default setting = ECO Mode
→
Off
The telephone can be set up so that the radiation frequency is reduced; Page 14.
If necessary, you can increase the range of the telephone system by switching ECO mode off;
Page 14 (ECO Mode
→
Off).