PABX / Supplementary Services
15
If you want to send SMS text messages from a private branch exchange extension, it is necessary
to store the number for an outside line for your PBX in the handset preceding the Service Centre
number.
Sending SMS messages is not available for Call−by−Call connections at present.
Sending SMS messages is liable to costs.
If the recipient in the conventional telephone network does not use an SMS service or his telephone is not
basically equipped to handle SMS messages, the SMS is automatically converted to a voice message.
Costs are charged by your telephone network provider.
SMS Service Centre
SMS messages are distributed via a Service Centre. If you want to send SMS text messages, you must first
program a service centre number in your handset
Page 13. Please contact the provider of your choice for
the necessary service centre call numbers and the procedure for enabling the SMS service.
Your telephone has already been prepared to send SMS text messages. Service centre numbers
are already programmed in the handset. Activate the required Service Centre in the SMS menu
Page 13.
Send Centre 1
Send Centre 2
Swisscom: 0622100000
Empty
Entering text
The digit keys are labelled with letters for the entry of text. Letters, digits and special characters are entered by
pressing the relevant key the respective number of times. Please refer to the Menu Structure for a description
of the navigation for writing texts
Page 11.
#
Switch between upper and lower case
Clear
Delete the last character entered
SMS text templates
There are 3 text templates available for you to program and store
Page 11.
SMS alert signal (alarm)
An acoustic signal is issued when a new SMS text message is received. The signal can be activated or
deactivated via the menu. Refer to Page 13 for the sequence of menu option selections.
11 PABX / Supplementary Services
R−functions on private branch exchanges
If your telephone is connected to a private branch exchange, functions such as call forwarding or automatic
call back can be used via the
R−button
(
R
). Refer to the operating manual provided with your private branch
exchange as to which Flash time must be set in order to use these functions. The sales outlet where you
purchased the exchange can provide information as to whether the telephone will work properly with the
exchange. Use the menu to set the Flash time (Recall Mode). Refer to Page 14 for the sequence of menu
option selections.
R−functions and supplementary services
Your telephone supports supplementary services provided by your telephone network provider, such as
brokering or conference calls. These supplementary services are invoked by pressing the
R−button
(
R
).
Please contact your telephone network provider regarding which Flash time must be set to use the
supplementary services. Also contact your telephone network provider with regard to enabling supplementary
services. Use the menu to set the Flash time (Recall Mode). Refer to Page 14 for the sequence of menu option
selections.
Dialling pause
When using private branch exchanges, it is necessary to dial an access code to obtain the dialling tone for an
outside line. Some older private branch exchanges may take some time before you can hear the dialling tone.
In the case of such private branch exchanges, a dialling pause can be inserted after the number for an outside
Содержание DF1101
Страница 1: ...Cordless DECT GAP telephone Operating Instructions DF1101...
Страница 19: ...Notes 19 Notes...