switel DE34 Series, Руководство по эксплуатации

Страница: 55 / 72

62
55
The telephone base station is equipped with an energy−efficient switching power
supply S002MV0600021 (INPUT 100−240V ~ 50/60Hz 100mA,
OUTPUT 6V
210mA).
The zero load is approx. 0.1 W. The average efficiency is approx. 67%.
The power consumption of the base station is:
− in operation (standby/talking): approx. 0.46 W / approx. 0.59 W
− when charging the handset: approx. 0.73 W
The charging station(s) supplied with the telephone set is/are equipped with an
energy−efficient switching power supply S002MV0600021
(INPUT 100−240V ~ 50/60Hz 100mA, OUTPUT 6V
210mA).
The zero load is approx. 0.1 W.
The average efficiency is approx. 67%.
The power consumption of the charging station is:
− without handset: approx. 0.1 W
− when charging the handset: approx. 0.39 W
Charging the batteries
Before the handset is used for the first time, insert it in the base/charging station
for
at least 15 hours.
When the handset is properly inserted in the base station / charging station, you will hear an
acoustic signal. The handset warms up during the charging process. This is normal and does
not represent a risk. Do not charge the handset with charging units from other manufacturers.
The current
battery charge status is indicated in the display:
Full Low Empty
Setting the display language
Select the language required (also refer to Menu Structure", Page 64):
> MOBILT EINST > SPRACHE >... ( > HS SETTINGS > LANGUAGE >...)
Setting the time and date on the handset
The time and date are set via the menu. Refer to Page 64 for the sequence of menu option
selections.
Changing the display indicator for Standby mode
The handset display can depict either the internal handset number or the date and time set.
3 sec.
Change the display
Automatic answering (Auto answer)
If this function is activated, an incoming call is taken when the handset is removed from the
base/charging station. Use the menu to activate or deactivate this function. Refer to Page 64
for the sequence of menu option selections.
Private branch exchanges
The information on Page 65 explains how to install your telephone in a private branch
exchange.
Low−radiation (ECO mode) (single pack only)
The level of radiation is considerably lower than that of standard DECT cordless
telephones when in Standby mode (when the handset is in the bsae station).
In talk mode, radiation is reduced (depending on the distance between
the handset and base station).