- Setting up -
104
3 Setting
up
3.1 Safety
information
NOTE:
Before setting up, it is essential that you read the Safety Information at the
beginning of this operating manual.
3.2
Check contents of pack
The following items are supplied:
one base station
one mains cable
one handset
two standard batteries
one telephone connecting cable
one instruction manual
3.3
Connecting the base station
Position the telephone near to your telephone connection socket and to a mains socket.
1.
Insert the plug of the power supply into the socket on the backside of the base station
and plug the power supply into a properly installed 230 V mains socket. The plug-in
power supply for the base station must always be connected. For safety reasons, use
only the plug-in mains power supply provided.
2.
Connect the telephone cable supplied to the telephone socket and the telephone jack
on the backside of the base station. Use only the new telephone cable provided.
3.4
Fitting standard batteries
To fit the standard rechargeable batteries supplied into the handset,
press on the upper edge of the battery compartment and slide it
downwards. Now insert the batteries taking care to ensure that the
polarity is correct. Close the battery compartment cover.
Important note:
Place the handset in the
base station
with the display to the
front
for at least 16 hours
. The telephone may malfunction if the batteries are not
properly charged. The charging light
on the base station will come on.
+
AAA
+
AAA
