switel BC-108, Руководство по эксплуатации

Страница: 31 / 36

- Setting up -
31
3 Setting up
The parent unit is operated by a 9V block battery (not included). The baby unit can be operated by
the power supply provided or by a 9V block battery (not included).
Note: In order to reduce the production of electromagnetic fields, we recommend the use of batteries.
3.1 Setting up the baby unit
3.1.1 Fit batteries in baby unit
1. The battery compartment is located on the rear.
2. Open the battery compartment with a small screwdriver.
Note: For safety reasons, the battery compartment is locked by means of a screw so that the
baby cannot open the compartment. This ensures that the baby is unable to come into contact
with the batteries.
3. Connect the battery cable to the 9V block battery, taking care to ensure that the polarity is
correct.
4. Place the battery in the battery compartment and close the compartment.
The battery should be changed if the appropriate indicator light shows red during battery
operation.
3.1.2 Operation with plug-in mains power supply
Insert the small round plug into the socket provided on the rear of the baby unit and plug the power
supply into a mains socket (230V/50Hz). Ensure that the plug-in mains power supply is adequately
ventilated.
3.2 Setting up the parent unit
1. The battery compartment is located on the rear.
2. Open the battery compartment with a small screwdriver.
3. Connect the battery cable to the 9V block battery, taking care to ensure that the polarity is
correct.
4. Place the battery in the battery compartment and close the compartment.
The battery should be changed when the appropriate indicator light comes on.