22
Settings
Light Sensing (Beta)
The light sensing feature allows you to set automations based on the illuminance level
or the relative intensity of sunlight. It's still in the beta stage and is being upgraded
continuously, so please explore the details in the latest app release.
Delay
You can set up 1 delay for countdown action. You can set the countdown time and
percentage of opening or closing.
Schedule
You can set up 5 schedules on board, or unlimited schedules with a hub. You can set the
day, time and percentage of opening or closing.
Charging, Firmware and Factory Reset
Charging
•
5V=1A adapter is required to charge with adapter.
•
Battery life is tested under condition of runway of 3 meters, loaded with 8 kg of
curtain, opened and closed twice a day under 25°C. Battery life may vary given
different condition.
•
Illuminance level 6 is required to charge with solar panel.
Firmware
Please make sure you have the up to date firmware by upgrading in time.
Reset to Factory Settings
Long press the button for 15 seconds until the LED lights up. Then release the button. If
you are using double side curtain, you will need to redo the calibration on both Curtains.
Caution: You may lose all the settings after factory reset and you may need to add the
device again and redo calibration.
