BR4 - Appliance User Manual v2.0
Page:
47/48
If you don’t have TFTP server you can use the console interface. Start
the receiver, with the
loadb
command, and then escape to the terminal
program's send file option, and send the file. When you load the file to
your board, it'll go something like this:
>Loadb 2000000
Load Address: 0x2000000
Loading: ##########################
done
Bytes Transfered = 131120 (20030 hex)
>eeprom write 2000000 0 $(filesize)
•
Alternative approach to upgrade your uImage is to use the GUI and
HTTP protocol. Go to
Firmware upgrade
and select
HTTP URL.
You can reset or keep the PBX configurations using the provided
check box. Recent versions of the BR4-Appliance firmware you can
find in our download section at
www.switchvoice.com
.
You need to
specify the full path and file name for upgrade. To get the full link you
can right mouse click on the requested item in our download section
and select “Copy Shortcut” if you use IE or “Copy Link Location” if
you use Ffirefox. Now you have the link (
http://www.switchvoice.com/files/uImage-br4-ui2.15.img
) in the
clipboard and you can paste it in the Firmware upgrade form like it is
shown bellow
•
If you prefer you can update uImage using TFTP protocol instead of
HTTP. In this case please use
switchvoice.com
TFTP server. You
need to specify the uImage file name as well. The latest file name you
can check from our download section at
www.switchvoice.com
. All
uImages
available in the download section are available from our
TFTP server (
switchvoice.com
) as well.
