Description of function
LED display
Warning
Features
0% 25% 50% 75%
KA-M20S
Dual Batteries Hot Swap Plate
Ver:A
Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: [email protected]
USER MANUAL
S W I T E l e c t ro n i c s Co. , L t d.
Congratulations on your purchase of this product. Please read this user manual carefully.
Only SWIT pocket batteries can be used.
Make sure the power-consuming
equipment(s) meet the battery
specifications.
Keep the terminals clean and never
short-circuit the plate terminals.
◆
◆
◆
Intelligent identification of load power，automatically adjusting the dual batteries to supply
power simultaneously or sequentially.
Support hot swap function, realizing continuous power supply.
Support battery real-time power indicating and battery empty power reminding.
Support SONY/RED camera remaining time display.
Dual D-TAP output socket, powering the camera and other devices simultaneously.
Ultra-thin design, light and portable.
◆
◆
◆
◆
◆
◆
Description of appearance
Specification
2
Fig.1
Fig.2
①V-mount socket
② V-mount lock
③Main electrode output interface
④D-TAP output socket
Empty power reminder Power indicator
Total power of the
device≤maximum
output power of
any battery
Total power of the
device＞maximum
output power of
any battery
Automatically switch to dual batteries
sequential power supply mode.
Intelligently identify the two batteries’
power. The lower battery supplies power first,
and it will automatically switch to the other
battery when it’s capacity is lower than 6%,
which can avoid the cameras alarming when
the battery power is below 5%。
When both batteries are below 6%, they will
power simultaneously until the batteries are
empty.
Support hot swap. The user can
replace any battery at any time.
Automatically switch to dual batteries
simultaneous power supply mode.
Support different power batteries to
supply power simultaneously.
Both batteries correspond to a group of LED indicators respectively.
When the plate with no load is mounted on the battery，the indicator
flashes to indicate the current battery power and then off；
The status of the indicators is as follows：
EMPTY
EMPTY
●●● ○
●● ○ ○
● ○○ ○
○○○ ○
○○○○
●●●● ○
●●●○ ○
●●○○ ○
●○○○ ○
○○○○
Indicator status
in use
Indicator status
when idle
Capacity percentage
75%～100%
50%～75%
25%～50%
6%～25%
<6%
KA-M20S
V-mount×2（suitable for SWIT pocket batteries）
V-mount×1（suitable for kinds of V-mount socket equipments）
D-TAP ×2
14.4V
Same as single battery maximum output power（same model batteries）
Same as the smaller maximum output power of the two batteries（different model batteries）
Same as main electrode or 150W/10A(take the smaller value)
Same as single battery maximum output power*2（same model batteries with same
remaining power）
Same as the smaller maximum output power of the two batteries*2（different model
batteries with same remaining power）
Same as main electrode or 150W/10A(take the smaller value)
-20℃～50℃
148
X
108
X
28mm
238g
Model
Input socket
Output socket
Nominal output voltage
Main electrode
D-TAP
Main electrode
D-TAP
Input
and
output Maximum
output
power
Sequential
power supply
mode
Simultaneous
power supply
mode
Operating temperature
Dimension
Net weight
