17
*2 Recall Profile/Save Profile
Monitor supply 4 User setting,User can save current setting according to demand and habit to
(USER1~USER4).After that,user only need to select “USER1~USER4” to show corresponding menu
setting.
For example：Adjust “Color Temp” to 2200K，switch on assist function such as “Histogram”，set
function key such as F1 to “Only Blue” ，now save all these setting to “USER 1”，turn “Menu/Enter” to
select “Recall Profile”-“USER 1”，monitor will change all setting to the setting which saved in “USER 1”.
*3 DHCP
The IP address will be assigned by router or switch automatically when “DHCP” function is “ON”；
User can set IP/Net mask/Gateway manually to match their own Network segment when “DHCP”
function is “OFF” in order to detect the NDI signal source in system.
*4 IP
Connect monitor to the LAN with NDI IN/ETHERNET port in order to control monitor by website.
Pin No
1
2
3
4
5
6
7
8
Pin Name
TX+
TX-
RX+
RX-
Website loading：Open browser and enter the IP address to load the monitor web page.
◎ Make sure the network cable which used to connect monitor with computer directly is
cross line cable.
◎ Make sure the network cable which used to connect monitor with router is
straight-through cable.
◎ If you have any problem with your network connection,please ask your network administrator
for help.
*5 Update
Firmware can be updated via USB port，update steps as below：
1、Update the latest firmware to the root of USB driver
2、Switch on monitor,connect your USB driver with monitor
3、Select “MENU”-“SYSTEM”-“Update”,the monitor will update automatically.
4、Press “Power” button to switch off and reboot monitor after successfully updating.
NDI IN
ETHERNET
