8
color under SDI and HDMI input, for users to check if the subjects are focused.
User can set function Keys F1
～
F5 or GPI pins as “Focus Assist” to turn on or off this function.
Zebra stripes
Zebra Stripes are used to check if the image is over exposed or not by showing black and white
lines on the monitor. It is considered over exposed when luminance value exceeds 90%.
User can set function Keys F1
～
F5 or GPI pins as “Zebra” to turn on or off this function.
Freeze Frame
The freeze frame is to capture and display the current broadcast frame.
User can set function Keys F1
～
F5 or GPI pins as “Freeze Frame” to turn on or off this function.
R/G/B/Mono
R/G/B/Mono is to display only the blue/red/green primary signal or the luminance signal only so as
to monitor the image noise.
User can set function Keys F1
～
F5 or GPI pins as “R/G/B/Mono” to turn on or off this function.
False Color
The false color is used to aid in the setting of camera exposure. Under false color mode, there’s a
color chart on the bottom of screen for reference. The color from the dark to the bright will be displayed
as blue, cyan, green, yellow, orange and red in a consecutive way. User can set function Keys F1
～
F5
or GPI pins as “False color” to turn on or off this function.
AFD
（
（
（
（
SDI
）
）
）
）
It is the abbreviation of active format description. AFD is to display the SDI embedded AFD
information graphically on the screen.
H/V Delay
（
（
（
（
SDI
）
）
）
）
Under SDI input, H/V Delay can be used to display line/field blanking signal, and to observe the
horizontal and vertical synchronous signal.
UMD
When using external control unit, it can display the video source ID and tally information on the
screen.
Image Flip
Horizontal, vertical, horizontal and vertical two-way image flip function.
Содержание S-1243H
Страница 20: ...20...
