SWIT Electronics S-1243H, Руководство пользователя

Страница: 7 / 20

7
· OSD
Time
⑴
code
（
SDI
）
Under SDI input, it can display Time code. If no Time code information is detected, it will be
displayed as “TC UNLOCKED”
User can set function keys F1
～
F5 or GPI pins as “Time code” to turn on or off this function.
UMD
⑵
Set up the UMD under ‘UMD” submenu.
⑶
AFD (SDI)
User can set function keys F1
～
F5 or GPI pins as “AFD” to turn on or off this function. If no
relevant information is detected, it will be displayed as “AFD: UNLOCKED”.
Audio
⑷
Bar
Monitor the audio information. The relevant parameters like position, audio channels and blending,
etc can be changed under “Audio Bar” submenu.
User can set function Keys F1
～
F5 or GPI pins as “Audio Bar” to turn on or off this function.
Introduction of audio and video functions
2-ch embedded audio meters
Under 3G/HD/SD-SDI, HDMI and ANALOG (CVBS, VGA, YPbPr), it displays 2 channels
embedded audio meters. The audio meter is green, and will turn yellow when audio exceeds -20dB,
and turn red when audio exceeds -9dB.
Audio alarm
If the embedded audio value is too low or no embedded audio, it will display “MUTE” or
“UNLOCKED” in the audio bar.
Time code
（ （ （ （
SDI
） ） ） ）
Under SDI input, it can display the SMPTE time code (VITC1, VITC2 or LTC) on the top of the
screen, which is used extensively for synchronization, and for logging and identifying material in
recorded media. If no Time code information is detected, it will be displayed as “TC UNLOCKED”.
Internal Color Bar
Under SDI and HDMI input, it has 100% internal color bar which helps analyze the monitor color
and adjust the display parameter.
User can set function Keys F1
～
F5 or GPI pins as “color bar” to turn on or off this function.
Peaking focus assist (red/blue switch)
The Peaking focus assist function is to mark the sharpest edges of the image with red or blue