Avena 248TE
84
Avena 248TE
Base station settings
(available on the handset)
• Press
Menu
, select
Settings
and press
OK
.
• Select
BS Settings
and press
OK
.
•
Select a function from the list using the navigation keys
†
/
π
and press
OK
.
-
Ringer
- Select the ringer melody and volume for the base.
-
Ring Priority
- see above.
-
Dial Mode
- Tone - see above.
-
Recall Mode
- You may need to use the recall function if you are connected to a
PBX. Contact your PBX supplier for further information.
-
First ring
- see above.
-
System PIN
- see above.
-
PBX Access Code
- see above.
-
Reset base
Extending the Avena 248TE
The delivered handset is already registered on to base station. In standby the internal
number of the handset is displayed.
You can register up to 5 handsets to your base station.
If you register your Avena 248TE handset with a "third party" base station or a "third
party" handset on your Avena 248TE base station (GAP), you may not be able to use
some functions or only to a limited extent.
Register new handsets
Accessory handsets must be registered to the base station. Use the handset menu for
registration:
•
Press
Menu
, select
Settings
press
OK
.
• Select
HS Settings
and press
OK
.
• Select
Register
and press
OK
.
•
Select the desired base station. Press
OK
.
•
Enter the system PIN (0000 on delivery). Press
OK
.
•
Press and hold the paging key on the base station.
•
If the registration is successful you will hear a confirmation signal.
Telephoning with several call partners
During a call you can make a second internal call (enquiry call), switch between call
partners (brokering) or simultaneously converse (3-way conference call) without the
need for two telephone lines.