RE729 Programming Manual to PSWx29 VoX.docx
-
7
-
Enter Tone 1
Enter Tone 2 (If Tone 1 is a long tone check “L” to grey out Tone 2)
Enter Address name "Mark" (cannot be entered before tone 1 is specified)
Select from one of 4 address groups (
Grp.
)
Leave
“Priority”
unchecked
Select Type: ToneAndVoice
Select Voice memory: Dynamic
Select from one of eight Alert patterns (Beep)
Select “Rep.” 4 (alert pattern repetitions)
Leave “P”, “2.” “CM” and “E” unchecked (pause between repetitions, charging unit
alert mask and the column for the extension profile)
Check the profile with the corresponding frequency for this alert tone.
Example: ChF=159.270
Repeat for each set of tones. Here InSP will not alert the pager, as this is the “Monitor
Mode”.
Setup menus
Click “Options” to set up pager
menus.
Classic User Interface
Drag and drop the icons so that
they reflect the menu image on
the left.
New User Interface
Volume is always increased
with with a short press on the
right button, decreased with
longpress right. Alerting Modes
are set together with the
receiving channels, as is
scanning, non- scanning. To
switch between profiles simply
press “left” repeatedly. To
replay a stored voice message
longpress left.
