5
After the successful start- (boot-) process the screen shows „DiCal-ToM ready for use“.
The sound playback can be stopped by touching
the screen.
ToM is now prepared to receive POCSAG-
messages, depending on the proper programming
of the POCSAG-receiver device (page 21).
If you are using a low power POCSAG-test-trans-
mitter it can be necessary to hold it close to the
antenna in some cases.
According to the text settings the messages will be
visualized in 3 different font sizes (1,2,3) or
dynami-cally in full-screen mode.
After the timeout the screen-saver shows the
actual time at different positions on the screen.
The screen-saver can be set in the configuration
menu.
