9
7.
Synchronise the device
SW 650 Pro automatically synchronises the data
after the first pairing. Also at first, there is an AGPS
syncronization. Steps, active calories, distance,
date and time is included in the synchronisation.
View the available information daily, weekly or
monthly. Synchonisation will normally take 1-2
minutes. If synchonisation fails, disconnect and
reconnect the Bluetooth connection.
6. Synchronize data
The bracelet synchronizes data automatically after
pairing/connecting with your smartphone. Syncing
data includes steps, calorie, distance, date and time.
To synchronize, please click the above left corner to
synchronize; it will take 1-2 minutes. When unable to
synchronize data, disconnected the Bluetooth and
retry to connect again.
7. Sleeping monitor
The bracelet/device could detect and recognize
automatically your sleeping status and monitors
the whole sleeping progress. This device will
analyze/tracks your sleeping quality based on the
movements you make during night.
Bad quality sleep > lots of movement
Good quality sleep > little movements
Note: you will need to wear the bracelet during the nighttime in order to
get the results of your sleeping quality during the night.
Enable the sleep monitoring in the app by going to the “Device” tab and
