8
Establishing a Wireless Link
To transmit DMX data wirelessly, a transmitter and one or more receivers are used. The receivers have to be linked
to the transmitter as shown below.
Linking
Ensure that all receivers which are supposed to become linked to the transmitter are unlinked (the Link LED of the
receivers is turend off) before linking. If required, follow the procedure described below under Unlinking.
Transmitter
Link
Link
Receiver
Receiver
On transmitter:
Press the Link button to link all unlinked receivers in the
range of the transmitter.
On receivers:
During the link process, the Link LED blinks.
The Link LED turns permanently on when the link is
established and DMX is received from the transmitter.
When a link is established, but no DMX data is received, the
Link LED is lit most of the time but turns dark very briefly
about once a second.
Unlinking
Transmitter
3sec
Receiver
Receiver
3sec
3sec
On transmitter:
Press and hold the Link button for 3 seconds to unlink all
devices previousely linked to the transmitter.
On receivers:
Press and hold the Link button for 3 seconds to unlink the
device.
When the receiver has been successfully unlinked, its Link
LED is turend off.
