DMX Only (only on XSR models)
The "DMX only" function removes all non DMX data before sending the data to
the Output ports. RDM data will be removed too.
This can be helpfull when DMX devices are not compatible and do not check the
data they receive as valid DMX signals.
The "DMX only" function is activated by pressing the "DMX only" button. On
terminal and Installation versions, the button is only accessible with a tool.
Output Ports
The output section of
versions with XLR
connectors:
The OUTPUT section
of versions with
terminals:
The OUTPUT
terminals are located
on the back of the
devices.
Each Output port is individually optically isolated, meaning that it is totally isolated
from the other Output ports and the Input selection.
The Pins 4&5 on models with 5-Pin XLR connectors are not connected.
10
Line Termination
All XSP and XSR splitters have a built-in line termination. The termination is
activated by pressing the termination button. On terminal and Installation versions
the button can only be accessed using a tool (such as a paper clip).
E
