The RDM LED indicates if RDM data packets are preset. In a pure DMX
environment this LED remains in OFF state.
The XSR has a built-in line termination. This can be activated by
pressing the termination button. A LED indicates if the termination is
activated.
The "DMX only" function of the XSR allows removal of all RDM data
from the Output ports. A LED indicates if the "DMX only" function is
activated.
Input and Thru Port
Protection
Transceiver
Line
Termination
Input Port
Thru Port
The THRU port is hardwired with the INPUT port and allows to daisy-chain the
devices, even when the XSR is not powered. On all XSP and XSR models with a
5-Pin XLR connector the pin 4 and 5 are also looped through to the THRU port.
On all other models pin 4 & 5 are not available.
1
2
3
4
5
1
2
3
4
5
9
RDM Identify
Blinking of all Output LEDs: The RMD Identify is activated.
Errors
Blinking of “DMX only” LED: Error UID not valid. RDM operation is not
possible. DMX operation only.
Blinking of all LEDs (except power and termination LED): Fatal error
A multicolor LED
indicates
if a signal is available at the Input port. The LED
has 2 different states:
Green: Signal is present and Ok
Red: No signal is present or signal is present but faulty
The Power LED indicates if the device powered and if the power supply
unit of the XSR is working.
E
