manualshive.com logo in svg

Swisscom Top A47 ISDN, Руководство по эксплуатации

Поделиться
Скачать
Swisscom Top A47 ISDN Скачать руководство пользователя страница 44

40

20322071en_ba_a0

Terminating all calls

You can terminate all simultaneous calls one after the other as described in the section on «Ter-
minating individual calls«. Terminate the last call by pressing the softkey under »terminate«. The
line is again seized and the dialling tone can be heard.

➭

If you have replaced the handset or, for speakerphone mode, pressed the loudspeaker
button while a call is on hold, the Top A47

ISDN

 sends an acoustic signal. The display shows

»—Call active—«

«

. Life the handset or press the loudspeaker button to resume the call on

hold and terminate it.

Call forwarding

You can program your telephone to forward calls to specific users to another telephone. To do
this you must enter the other number. The following call forwarding options are available:

– »unconditional«: The incoming call for a user is immediately forwarded to the programmed

number and the telephone does not ring.

– »busy« If the user’s number is busy, the call is forwarded to the programmed number and no

call waiting signal is heard.

– »no reply« If the user does not answer the call and the call signalling time (ring time) has ex-

pired, the call is forwarded to the programmed number.

➭

Call forwarding can only be activated if at least one user is programmed for this function.

➭

Every user can program one of the three call forwarding options under any speed-dial
button (several call forwarding types can be activated simultaneously).

➭

When call forwarding is active, a symbol is shown and the LED remains lit if unconditional
(direct) forwarding is active.

➭

The caller pays only the cost of the connection from his telephone to yours. Connection
charges for forwarding calls to an alternative telephone are charged to you.

Call forwarding setup

Select the user.

Press the menu button until »Functions« is displayed.

Press the softkey repeatedly under »

« until the display shows

»Call FWD: off«.

change

Press the softkey under »change«. The display shows »Call FWD« with the user
code.

The second line of the display shows »ok,  , unconditional,  «.

If you do not want calls to be forwarded unconditionally, press the softkey un-
der » « to scroll down to the options »busy« and »no reply«.

Telephoning

Содержание Top A47 ISDN















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды