Swisscom Aton CLT418ISDN, Руководство пользователя

Страница: 17 / 76

15
2040522
3en_
ba_b0
Setting up the telephone
The batteries are not yet charged when you first unpack the telephone. Insert the
handset in the base station for charging. The flashing battery symbol on the handset
shows the charging status. The batteries will take around 14 hours to fully charge.
Note  Do not insert the handset in the base station without batteries.
 Do not use any other type of charging unit since this may damage
the batteries.
The following symbols indicate the charging status on the handset display:
Charging status "full"
Charging status "1/2"
Charging status "empty"
Once the new batteries have been inserted, the display on the handset indicates the
actual charging status only after a complete charging cycle.
Your telephone is now ready to use.
Please note: after you have inserted the batteries for the first time, the battery display
will indicate the correct information on the charging status only after a complete
charging cycle.
Use only approved rechargeable batteries NiMH AAA. Never use
disposable batteries/primary cells.
Approved models:  GP80AAAHC

H-AAA750A-UN
 GP75AAAHC
 GN85AAAHC

H-AAA900A