41
Base settings
Aton CL113 Duo / Swisscom en / A31008-M2202-F151-1-2X19 / registr_sett.fm / 07.07.2011
V
e
rsion 4, 16.0
9
.2005
Deactivating the ringer permanently
P
Press and
hold
the star key.
The
ó
icon appears in the display.
Reactivating the ringer
P
Press and
hold
the star key.
Deactivating the ringer for the current
call
§Menu§
¤
Silent
¤
§OK§
Activating/deactivating advisory
tones/battery warning tones
Your handset uses advisory tones to tell you
about different activities and statuses. These
can be activated and deactivated independ-
ently of each other:
u
Advisory Tones
–
Confirmation tone
: at the end of an
entry/setting and when a new entry
arrives in the calls list.
–
Error tone
: when you make an incor-
rect entry.
–
Key click
: every key press is confirmed.
u
Battery Low
The battery requires charging.
t
¤
Advisory Tones
/
Battery Low
Select and press
§OK§
to activate
or deactivate (
³
= activated).
The
menu end tone
when scrolling at the
end of a menu cannot be deactivated.
Restoring the handset
default settings
You can reset any individual settings and
changes that you have made.
The following settings are
not
affected by a
reset:
u
Registering the handset to the base
u
Date/time
u
Entries in the directory, calls lists
§Menu§
¤
Settings
¤
System
¤
Reset Handset
§OK§
Confirm prompt.
Base settings
The base settings are carried out using a reg-
istered handset.
Activating/deactivating
music on hold
§Menu§
¤
Settings
¤
Telephony
¤
Music on hold
Press
§OK§
to activate or deactivate music on
hold (
³
= on).
Repeater support
You can increase the range and signal
strength of the base using a repeater. You
will need to activate repeater mode. This will
terminate any calls that are in progress at the
time.
Prerequisite:
a repeater is registered.
§Menu§
¤
Settings
¤
System
¤
Repeater Mode
Press
§OK§
to activate/deactivate repeater
mode (
³
= activated).
After activating or deactivating the
repeater, switch your handset off and
on again (
Please note
u
Eco Mode
/ Eco Mode+
and repeater support cancel each
other out i.e., if you use a repeater, you
cannot use Eco Mode or
Eco Mode+
.
u
The default encrypted transmission
setting is deactivated when repeater
mode is activated.
