S W I S S C A V E
6 3 0 0 Z u g , S w i t z e r l a n d
e m a i l : i n f o @ s w i s s c a v e . c h
SWISSCAVE WINE COOLER CABINET
MODELS WL SERIES
USER MANUAL (ENGLISH)
I
Mounting of the Door Handle on the Front Door
1. First you unmount the two screw-nuts on the front-glassdoor. In order to do that you have to put a
crosshead-screwdriver through the small holes on the inside of the glassdoor (in order to find these
holes you carefully push the rubber seal a little bit to the side). Now you can mount the door handle
instead of the screw-nuts.
2. When mounting the door handle please fix it carefully, so that you don’t damage the glass door!
II
Removing and Inserting Extendable Racks
SWISSCAVE wine coolers allow for easy removal and replacement of extendable racks. No tools are
required.
Removing the rack:
Note the small plastic springs of the metal guides on both sides of the extended rack. With your
fingers, push the left spring upwards and the right spring downwards so that the rack can be
completely pulled out of the guides. This requires a little tug.
When replacing the rack, make sure the rack is inserted straight into the guides and then pushed all
the way into the back. It is easiest to align the rack with two people. The rack should glide freely on
the ball bearings.
We recommend that you keep every second or third rack in its original position in order to avoid
placing too much weight on any single rack. The bottom, and with the 2- zone model the intermediate
floor as well, can hold extra weight (for example, 5 to 6 layers of bottles).
When several layers of bottles are placed on top of one another, it is important to note that the bottles
in the rear do not make contact with the back wall of the cooler (cooling system).
