Page 4
3503.502.02
Version 1.0
The camera can also be fixed from top (for example to fix it under a roof); for that you should
invert the fixation plate with its screws between bottom and top:
2.2
Wiring the installation
Connect the delivered Start-Finish cable (3503.625) on the bottom of the camera on the I/O
connector. Connect the start device on the TUCHEL Start plug and the finish photocell on the
FINISH bananas. If you want to do manual recording of images, it is recommended to connect a
pushbutton (option 2872.003) on the FINISH bananas.
Connect the 10m network cable Ethernet Gigabit (9051.1315) between the Ethernet connector on
the camera and the PoE connector of the PoE injector (power supply). Connect the 2m network
cable Ethernet Gigabit (9051.1317) between the LAN connector of the PoE injector and the
computer.
Connect the power cord between the PoE injector and the mains; the camera will automatically
start up. To secure system availability during power disturbance, it is recommended to connect
the PoE connector on an Uninterruptible Power Supply (UPS).
