background image

2

3

Revision A.00

1. INTRODUCTION

1.1 Preface

To ensure trouble-free usage of our products we would like to provide the following technical and 

commissioning documentation. This manual is to help at every stage of use. Mandatory maintenance 

service tasks that are responsibility of the user, from appropriate transportation methods to periodic 

inspections. All the crucial information and warnings will be preceded by various caution symbols 

as shown below:

  

 

Electrical Voltage

  

 

Important Information

  

 

Useful Hint

Please read carefully the entire user manual and all other accompanying documents before first 

start-up. Improper use of the product may void the warranty.

Keep it as a reference for future maintenance and service procedures.

1.2 Disclaimer

The following instruction, unless otherwise stated, applies to all Swiss Rotors FanSet units. In exceptional 

circumstances, differences will be noted. This document is a property of Swiss Rotors, licensors or affiliates, 

protected by international trademark and copyright laws. Swiss Rotors constantly develops its products and 

this document is subject to change without notice.

Содержание FanSet SR190






















Отзывы: