Swiss Pro+ SP-AF8L.2, Инструкция по эксплуатации

Страница: 10 / 59

Before installing your appliance, read all safety instructions in this manual, especially the
sections on electrical safety and installation.
UNPACKING
• When unpacking the appliance, be sure to keep all the packaging materials until you have
made sure your new appliance is undamaged and in good working order. This product has
been packaging to protect itself
against transportation.
• Be sure to remove all packaging materials around the appliance and that the plastic film
used is also removed.
• CAUTION: Plastic wrapping can be a suffocation hazard for babies and young children.
Make sure all packaging materials are out of reach for children and that they are disposed of
correctly.
INSTALLATION
• Place the Air Fryer on a flat, stable surface that can support the weight of the air fryer. Do not
place the Air Fryer where heat, moisture or high humidity are generated, or near combustible
materials.
• The Air Fryer is intended to be used freestanding and must not to be placed in a
cabinet.
• The Air Fryer must have plenty of airflow. Allow 30cm of space above
the product, 10cm at the back and 5cm on both sides. Do not cover/block any openings on the
appliance. Do not remove the feet.
•
The power cord must not run under the air fryer or over any hot or sharp surface.
•
Make sure that the power socket is easily accessible so it can be unplugged in an emergency.
IMPORTANT ADVICE
The plug must be connected to an appropriate outlet that is installed and earthed in accordance
with local standards and requirements. If unsure, consult an electrician or a service
representative. Do not, under any circumstances, cut or remove the third (grounding) prong
from the power plug.