※Instruction Manual
■PLEASE READ CAREFULLY BEFORE USING
1. Turn the ON/OFF switch only when using the product.
2. Keep the switch in middle (lock-off) when swapping bits, batteries or moving to
another work area.
3. Be careful not to slip off the target when using long bits.
4. Keep the batteries separated from the product when not in use.
■SAFETY INSTRUCTION
※ Using a different adaptor other than the specified may damage the product.
※ After reading, please keep the product where you can see it at all time.
Please follow the manual carefully to avoid damages and injuries.
1. Please install the battery correctly and securely before using.
2. When the product overheats, immediately discontinue use and wait for the
product to cool down before using again.
3. Do not attempt to swap bits while the machine is switched on.
4. Avoid using any components that does not come with the product.
5. Do not disassemble or damage batteries.
Keep batteries in room temperature and use the charger only when charging batteries.
6. Do not expose batteries in direct sun ight or leave in high temperature environment.
This may cause for the battery to explode. If it feels hot, leave it to cool down before using again.
7. It is advisable for the battery to drain completely before charging. This will help prolong its life.
8. Use only the charger included in this package.
Caution: Follow the instructions to avoid serious injuries or damages
to the product.
Warning: Follow the instructions to avoid serious injuries and accidents.
Must prohibit doing this action
Must unplug the power
Must follow the instruction
Must follow this instruction
Do not disassemble
