— 10 —
SMART SEAT BIDET
TROUBLESHOOTING
CAUTION:
Do not disassemble, repair or remodel the unit.
If you have any questions or concerns please contact us:
1-434-623-4766
Status
Cause
Solution
Water is too
low during
WASH/BIDET
1. Low water pressure of the unit.
2. Low water pressure of the water supply.
1. During WASH/BIDET, turn the lever fast to
the biggest volume.
2. When water supply pressure is lower than
0.07 MPa, contact local department for
water pressure question.
No water
comes out
during WASH/
BIDET
1. Water shut-off valve is turned off.
2. Filter net of T-shaped connector is stuck.
3. Filter net of water inlet hose is stuck.
4. Nozzle head is stuck.
5. External water pressure is low.
1. Turn on the water shut-off valve.
4. Take off and clean the nozzle head.
5. Increase external water pressure.
Water
dropping from
bowl when
using the unit
1. External water pressure is too big.
1. The maximum water pressure of the
unit is 0.8 MPa. If water supply pressure
is higher than that, please contact local
department for water pressure question.
2. Clean the filter net of T-pipe.
3. Clean the filter net of the water inlet hose.