— 6 —
7. Connect Water Pipe to the T-Pipe
NOTE:
Please remove the regulator cover and regulate o-ring under the following conditions:
a. When the water dynamic pressure is lower than 0.05 MPa.
b. When the nozzle cannot work normally and water is low.
·
Take out regulator with pliers.
·
Remove the regulator cover and regulate o-ring except the sealing o-ring.
·
Insert the regulator component into the inlet pipe.
CAUTION
: Must use the regulator cover and regulate o-ring when the water pressure is bigger than 0.1 MPa.
8. Connect Water Hose
·
Press the filter and washer at the two ends of water hose into the threaded area, then connect the main
body and T-pipe with water hose.
·
Turn on water and check for leaks.
WARNING:
Do not lift the product with the seat cover and seat open. This may cause mechanical trouble.
The water supply cannot be above 104°F or below 32°F.
Washer
Filter
SMART SEAT BIDET
TECHNICAL SPECIFICATIONS
1
3
2
Regulator
Regulator
cover
Regulate
o-ring
Sealing
o-ring
