3
SATDDAVB • SATDDAVC
HOW TO USE
ATTENTION
WARNING
Function
Action
Action LED Indicator
POWER ON / OFF
Turn ON
Long press button
Green LED lights up
for 2 seconds
Turn OFF
Long press button
Red LED lights up
for 2 seconds
LIQUID VOLUME ADJUSTOR
Small: 1.5ml
Short press button
Green LED
blinks once
Large: 2.5ml
Short press button
Green LED
blinks twice
CLEAN MODE – To dispense continuously; will auto-exit the clean
mode after 30 seconds.
Enter clean
mode
When Power ON,
long press button
for 5 seconds
Green and red LED
light up alternately
Exit clean mode
Under the clean mode, press button.
• Red LED light will blink every three seconds to act as a battery-
-changing reminder.
• Prime the dispenser by inducting several times to let the air out
before rst using.
• The factory setting of liquid outlet volume is small (1.5ml).
EN
Do not expose the dispenser to direct sunlight to avoid deformation.
Do not place in dusty areas or high humidity places such as shower room.
Place the dispenser on stable table. So as not to fall and damage the unit, or cause personal injury.
Do not let the dust into the dispenser. Otherwise may block the tube and need to replace
liquid and clean the tank.
Do not intentionally break or crash the dispenser.
Do not clean the dispenser with strong corrosive chemical solvent. Otherwise will cause
surface damage or deformation.
Do not disassemble, repair or transform
without permission. Otherwise will cause
breakdown.
Do not fill in corrosive chemicals.
Keep away from fire.
