Swisher ZTR51RC, Руководство пользователя

Страница: 10 / 23

㱆
Ȝ
Operator Presence System:
Be sure to check that the operator presence and
interlock systems are working properly before every
use. If your mower does not function as described,
repair the problem immediately. See the tractor manual
for all tractor related safety interlocks.
The attachment must be connected in order to start the
engine of the tractor. If it is not properly or
securely connected, the engine will not start.
If using a mower attachment, any attempt to tilt the
deck into the maintenance position with
the engine still running should shut off the engine. If this
happens lower the deck back down to a level
position before attempting to restart the engine.
The deck height/tilt switches will cut out at the top of the
deck height as well as the end of the tilt
function. This is to prevent overloading of the winch.
When these positions are reached the winch
should not be able to continue lifting. However the deck
can be let down, which should reset the switch
operation.
Tires:
Maintain proper air pressure in all tires (SEE
SPECIFICATIONS section)
Keep tires free of gasoline, oil or insect control
chemicals which can harm rubber.
Avoid stumps, stones, deep ruts, sharp objects and
other hazards that may cause tire damage.
If operating in an area with thorns, it is recommended
to fill the tires with sealant.
Blade Maintenance:
For best results, mower blades must be kept sharp.
Replace bent or damaged blades.
Engage brakes & safely tilt front of mower (SEE
WARNING).
Install safety chains (supplied with tractor) to the front
edge of the deck before working under the machine.
Refer to Service and Adjustments section for
instructions.
CAUTION
Stop engine, apply brakes, and
remove ignition key for safety.
Disconnect spark plug wires. Wear
heavy, thick gloves when holding onto
blade. Avoid the sharp edge of the
blade.
CUSTOMER RESPONSIBILITIES
10
10
V-Belts:
Check V-belts for deterioration and wear before each use
and replace if necessary. Replace belts if they begin to
slip from wear. Refer to Quick Reference and Service &
Adjustment sections of this manual for instructions on
belt part numbers and how to properly replace belts.
Overall Unit Care:
Reduce the risk of fire by removing grass, leaves and
other debris that may accumulate on the machine.
Allow the machine time to cool before cleaning or putting
it in storage.
Wash mower periodically. Clean above and below deck.
Keep all electrical connections clean and secure.
Driving & Transport on Public Roads:
Check applicable road traffic regulations before driving
and transporting on public roads.
If the machine is transported, you should always use
approved fastening equipment and ensure that the
machine is well anchored to the towing vehicle.
The cutting deck should also be lowered to the lowest
position and the parking brake engaged during
transport.
WARNING
When it is necessary to tilt the mower
for any repair or service, use safety
chains and/or jack stands to provide
adequate support. DO NOT rely on
hydraulic or mechanical jacks.
WARNING
STOP THE ENGINE AND
DISCONNECT THE SPARK PLUGS
BEFRE MAKING ANY ADJUSTMENTS
TO THE MACHINE!
WARNING
Do not overinflate the tires. Serious
injury can occur if the tire explodes