Swisher ZT2460 Z-MAX Скачать руководство пользователя страница 2

2

LIMITED WARRANTY

The manufacturer’s warranty to the original consumer purchaser is:  This product is free 
from defects in materials and workmanship for a period of  two (2) years from the date of 
purchase by the original consumer purchaser.  We will repair or replace, at our discretion, 
parts found to be defective due to materials or workmanship.  This warranty is subject to the 
following limitations and exclusions:

In the event you have a claim under this warranty, you must return the product to an 
authorized service dealer.  All transportation charges, damage, or loss incurred during 
transportation of parts submitted for replacement or repair under this warranty shall be borne 
by the purchaser.  Should you have any questions concerning this warranty, please contact 
us toll-free at 1-800-222-8183.  The model number, serial number, date of purchase, and the 
name of the authorized Swisher dealer from whom you purchased the mower will be needed 
before any warranty claim can be processed.

THIS WARRANTY DOES NOT APPLY TO ANY INCIDENTAL OR CONSEQUENTIAL 
DAMAGES AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME 
PERIODS STATED HEREIN FOR ALL EXPRESSED WARRANTIES.  Some states do not 
allow the limitation of consequential damages or limitations on how long an implied warranty 
may last, so the above limitations or exclusions may not apply to you.  This warranty gives 
you specific legal rights and you may have other rights, which vary from state-to-state. This is 
a limited warranty as defined by the Magnuson-Moss Act of 1975. 

1) Engine Warranty             All engines utilized on our products have a separate warranty    

extended to them by the individual engine manufacturer.  Any 
engine service difficulty is the responsibility of the engine 
manufacturer and in no way is Swisher Mower Co., Inc. or its 
agents responsible for the engine warranty.  The Briggs & 
Stratton Engine Service Hot-Line is 1-800-233-3723.  The 
Tecumseh Engine Service Hot-Line is 1-800-558-5402.

2) Commercial Use         This product is not intended for commercial use and 

carries no commercial warranty. 

3) Limitation

This warranty applies only to products which have been 

properly assembled, adjusted, and operated in accordance 

with the instructions contained within this manual.  This 
warranty does not apply to any product of Swisher Mower 
Co., Inc., that has been subject to alteration, misuse, abuse, 
improper assembly or installation, shipping damage, or to 
normal wear of the product.

4) Exclusions                Excluded from this warranty are normal wear, normal 

adjustments, and normal maintenance

.

Содержание ZT2460 Z-MAX









































Отзывы: