Item #
Description
Part #
1
Right Side Mount Plate
10615TK
2
Cross Plate
10489TK
3
Left Side Mount Plate
10473TK
4
Carriage Bolt 5/16-18 X 1
10216
5
Nylock Nut 5/16-18
NB181
6
Bolt M8-1.25 X 25
NB723
7
Washer Flat
NB275
8
Washed Split Lock
NB159
9
Hair Pin #39
NB127
10
Clevis Pin
10305
1
2
3
4
5
6
7
8
9
10
Assembly Instructions
Note. These plates fit between the foot rest mount plates and the frame. After removing the foot rest bolts ,
save them for replacement if you remove the Mount Plate.
1.
Assemble the mount plate as shown. Attach the right side plate to the cross plate with the 5/16
Carriage bolts and nuts. Do not tighten at this time. Attach the left side mount plate.
2.
Remove the foot rest mounting bolts. Place the assembled mount plate between the frame and the
foot rest. Install the longer M8 bolts (4 Per Side) with the lock washer and the flat washer as shown.
Do not tighten. Repeat on the other side.
3.
Push the mount plate to the rear of the ATV and tighten the M8 Bolts. Repeat on the other side.
4.
Tighten the cross plate locknuts.
Yamaha
Footrest
Support
