Item #
Description
Part #
1
Mount Plate Right
10522TK
2
Mount Plate Left
10521TK
3
Channel Block Rear(Wide)
10420TK
4
Channel Block Front
10422TK
5
Lock Nut
NB181
6
Carriage Bolt
10197
7
Washer
NB275
8
Clevis Pin
10305
9
Hair Pin #39
NB127
10
Cross Plate
10419TK
Assembly Instructions
Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need
to be removed. Please retain plate and hardware to be reinstalled if the plate is removed..
1.
Assemble Items # 1,2, and 10 with hardware Carriage Bolts, Washers, and lock Nuts Items
6,7,&5.
2.
Place a Carriage Bolt, Item 6, into each of the mounting blocks. The narrow block go to the
front of the ATV, the wider blocks are used on the rear.
3.
Place the assembled mount up against the bottom of the ATV and identify the locating holes.
Place a block & Bolt into each of the holes and attach Washers and Nuts. Snug the hardware.
4.
Align the plate and tighten hardware
Front of ATV
1
2
5
6
3
4
7
8
9
10
