Step 6: Attach Wheel Assembly
See figure #6.
Insert ½” x 4-7/16” Hex bolt through wheel assembly,
install ½” Hex nut on ½” x 4- 7/16” Hex bolt, tighten nut
on bolt until it’s hand tight,
then loosen hex nut ½ turn.
Attach assembled wheel and ½” Hex bolt on to wheel
bracket and fasten with second ½” Hex nut. Repeat for
opposite side.
Make certain wheels spin freely after assembly.
Step 6 Hardware Needed:
2 - Wheel Assembly
2 - Hex Bolt (½” x 4-7/16”)
4 - Hex Nut (½”)
Step 7: Attach Hitch Bracket & Hitch Pin
See Figure #7
Attach hitch bracket to the tongue using 5/16” x 1” Hex
Bolt and 5/16” Lock Nut. Next, insert hitch pin through
hitch bracket and the tongue secure with cotter pin.
Fully tighten connections.
Step 7 Hardware Needed:
1 - Hitch Bracket
2 - Hex Bolts (5/16. x 1.)
2 - Lock Nuts (5/16.)
1 - Hitch Pin
1 - Hair Cotter Pin
Step 8: Attach Tongue to Top Tray
See Figure #8.
Attach the tongue to the top tray with the large opening
of the tray slot facing forward. Attach tongue using the
top tray holes to right side of slot (viewing from front).
For right side holes of tongue connection (view from
front), use 5/16” x 1-3/16” Bolt, 2 spacers per Bolt, and
5/16” Lock Nut. For left side holes of tongue connection,
use 5/16” x 1” Bolt and 5/16” Lock Nut, no spacers. See
figure #8 for detail. For holes left of tray slot (viewing
from front) use 5/16” x 1-3/16” Hex bolt, two ¼” spacers
per bolt, and 5/16” Lock Nut.
Fully tighten all connections.
Step 8 Hardware Needed:
4 - Hex Bolt (5/16”x 1-3/16”)
2 - Hex Bolt (5/16” x 1”)
6 - Lock Nut (5/16”)
8 - ¼” Spacer
7
