Swisher AE-48 PLUG AERATOR Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 12

Swisher AE-48 PLUG AERATOR Скачать руководство пользователя страница 5

Assembly Instructions:

Step 1: Insert Split Plastic Bearing

See Figure #1.
Push/Insert one plastic split bearing into each side of
the double spool assembly.
Repeat for each spool assembly.

Step 1 Hardware Needed:
8 - Split Plastic Bearings

Step 2: Attach Wheel Bracket to Axle Shaft

See figure #2.
Attach one wheel bracket to the middle hole of the axle shaft.
Note the wheel bracket ring should point towards the shortest
side of the axle. See Figure #2. Attach the wheel bracket
using a 5/16” x 1-3/4” Hex Bolt and 5/16” Lock Nut.

Fully

tighten connection.

Step 2 Hardware Needed:
1 - Axle Shaft
1 - Hex Bolt (5/16” x 1-3/4”)
1 - Lock Nut (5/16”)

Step 2A: Insert Hex Bolt

See Figure #2.
Next, insert from the short side of the axle a 5/16” x 1-3/16”
Hex Bolt into the hole on the wheel bracket closest to the axle.
(smaller hole) Attach 5/16” Lock Nut to the bolt.

Do not fully tighten until later step.

Step 2A Hardware Needed:
1 - Hex Bolt (5/16” x 1-3/16”)
1 - Lock Nut (5/16”)

Step 3: Assemble Short Side of Axle Shaft

See figure #3.
Assemble below items onto short side of the axle shaft in the
following order. Take note of the direction of plugger knives in
Figure #3.

1. Start with one double spool (knives facing inward)
2. 5.29” spacer tube
3. Double spool (knives facing outward)
4. 1” spacer tube
5. 7/8” Flat washer

Step 3 Hardware Needed:
2 - Double Spools
1 - 5.29” Spacer Tube
1 – 1” Spacer Tube
1 - Flat Washer (7/8”)

5

«
...
3
4
5
6
7
...
»

Содержание AE-48 PLUG AERATOR













Отзывы:

Нет отзывов