SwingSesh SlimSesh SS2, Руководство пользователя

Страница: 26 / 30

24
Installation, Maintenance, & User Manual
STEP 10 Monkey Bars Assembly
PARTS REQUIRED:
x2 Monkey Bar Post
x2 Monkey Bar Horizontal Support
HARDWARE REQUIRED:
31/4 ” bolt, 2 washers, lock washer, nut
31/2 ” bolt, 2 washers, lock washer, nut
x33
x1
A14
A15
STEP 11a
x7 Monkey Bar Rungs
STEP 11b
• On a soft surface on the ground, lay out the
two (2) Monkey Bar Posts A14 parallel to one
another and attach two (2) Monkey Bar Rungs
C12 between them using eight (8) 31/4” bolts.
Tighten using wrenches.
• On a soft surface on the ground, lay out the
two Monkey Bar Horizontal Supports A15
parallel to one another and attach three (3)
Monkey Bar Rungs C12 between them using
twelve (12) 31/4” bolts. Tighten using wrenches.
C12
31/4”
C12
C12
A9L
A10L
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
• Attach two (2) Monkey Bar Rungs C2 between
Posts a9 and a0 using eight (8) 31/4” bolts. If
no slide is installed, the monkey bars can be
installed between Posts A8 and A9 .
• Tighten all bolts using wrenches.
C12
A9L
A10L
A9L A8
NOTE: If no slide is installed, the Monkey Bars can be
installed between Posts A8 and A9 using one (1)
3 1/2” bolt on A9L and one (1) 3 1/4” bolt on A8 .
A9L
A8 A9L
A8
A14
A14
C12
C12
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
A15
A15
C12
C12
C12
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
31/4”
A14
A15
C12
C12