Safety Instructions
YOUR SAFETY AS WELL AS THE SAFETY OF
OTHERS IS IMPORTANT TO ACCO BRANDS.
IN THIS INSTRUCTION MANUAL AND ON
THE PRODUCT ARE IMPORTANT SAFETY
MESSAGES. READ THESE MESSAGES
CAREFULLY.
THE SAFETY ALERT SYMBOL
PRECEDES EACH SAFETY MESSAGE
IN THIS INSTRUCTION MANUAL.
THIS SYMBOL INDICATES A POTENTIAL
PERSONAL SAFETY HAZARD THAT COULD
HURT YOU OR OTHERS, AS WELL AS CAUSE
PRODUCT DAMAGE OR PROPERTY DAMAGE.
Important Safeguards
WARNING: FOR YOUR PROTECTION,
DO NOT CONNECT THE POUCH
LAMINATOR TO ELECTRICAL POWER
UNTIL YOU READ THESE
INSTRUCTIONS COMPLETELY. KEEP THESE
INSTRUCTIONS IN A CONVENIENT LOCATION
FOR FUTURE REFERENCE. TO GUARD
AGAINST INJURY, THE FOLLOWING BASIC
SAFETY PRECAUTIONS MUST BE OBSERVED
IN THE SET-UP AND USE OF THIS PRODUCT.
WARNING: TO AVOID ELECTRICAL
SHOCK OR OTHER INJURY, THE
FOLLOWING SAFETY PRECAUTIONS
MUST BE OBSERVED.
Electrical Safeguards
• The unit must be connected to a supply
voltage corresponding to the electrical rating
shown on the unit.
• Unplug the unit before moving it, or when it is
not in use for an extended period of time.
• Do not operate with a damaged supply cord
or plug. Do not alter the attachment plug.
The plug is configured for the appropriate
electrical supply.
• Do not overload electrical outlets beyond their
capacity. Fire or electrical shock could result.
• The unit is intended for indoor use only.
• Never push objects through the housing slots.
Do not spill liquid of any kind on this product.
• Close supervision is required when this product
is used near children.
General Safeguards
• Use the unit only for its intended purpose of
laminating documents.
• Do not place anything in the throat opening of
the laminator other than pouches/documents.
• Place unit on a secure, stable work area to
prevent the unit from falling and possibly
causing personal injury and damage to the unit.
• Follow all warnings and instructions.
• The socket outlet shall be installed near the
equipment and shall be easily accessible.
• Do not attempt single side lamination, this will
destroy the laminator.
• Do not block the vent slots, this will cause the
laminator to overheat.
2
