Swing
A-Frame up
3/8" lock washer
3/8" flat washer
3/8" flat washer
3/8 x 5"
Carriage bolt
3/8" lock nut
1/4" Pre-drill
Tighten
ALL
Lock nuts
until 2 threads minimum
extend past nut.
3/8 x 2-1/2"
Lag screw
15
1. Carefully swing the A-frame up and insert a second bolt. Attach as shown.
Tighten fasteners slightly snug at this point. Do NOT fully tighten.
2. Carefully move A-frame posts to make sure playset is square.
3. Now fully tighten all fasteners.
Ensure two threads minimum protrude past lock nut as shown.
4. Predrill hole and attach the L-bracket under beam as shown. (At both ends.)
!
