33
14-
1/2'
'
2'
'
14'
'
2'
'
32-1/2''
30-1/2''
16-1/2''
14-1/2''
120'
'
OUTRIGGER SWING
MOUNTS HERE
NO HOOK AND LOOP HERE
NO HOOK AND LOOP HERE
Outrigger Supports
1.
Along top of Swing Beam mark placement for Outrigger
2'' x 4'' Supports as shown in
(Fig. 22).
2.
Position four beam brackets (right and left) in position on
beam making certain the outside of the braces are 18'' apart
and the nailing edge of the bracket is flush with the top of the
beam
(Fig. 22a)
.
Note:
Outrigger Beam Brackets must be
placed a minimum of 8" from any adjacent structure or
accessory
(Fig. 22b)
. Attach using three 2-1/2'' screws per
bracket.
3.
Drill two 2'' x 4'' x 22'' supports as indicated in
(Fig. 22c)
.
Attach four swing hangers to the supports using 5/16'' flat
washers and loc nuts as shown in
(Fig. 22d)
.
4.
Center supports across beam, mark and drill 3/8'' holes
(Fig. 22a)
. Attach using two 2'' Carriage bolts, 5/16" flat
washers and loc nuts per bracket
(Fig. 22a)
.
Fig. 22
Caution: Be certain to Place Outrigger Brackets as
shown in Swing Beam Instructions (Fig. 22 ) where Hook
& Loop is absent on Swing beam
TIMBER-GLOVE
.
8" min.
Drill 3/8" Holes
2"
2"
22"
18"
18"
8" min.
Fig. 22c
Fig. 22a
Fig. 22b
2''
Carriage Bolt
Loc Nut
Washer
side view
top view
A-FRAME ATTACHES
HERE
Fig. 22d
x4
