13
12
Part 3
In software
Part 3
In software
HARDWARE SETTINGS
Start up the Swing Catalyst software.
Go to Settings in the Main Menu and select Hardware.
Select
Motion Plate 6 - 98x50 cm, 2048 cells (2013)
in
the dropdown menu and set the slider to ON.
1
2
2
3
3
4
4
5
5
6
Verify that the sensor plate is shown as connected.
Click the “Configure...” button to open the configuration
dialog and select the “Stance Sensor” tab.
Verify that your computer is connected to the internet, and
click “Download and install” to install the calibration file.
Please note that installation may take a few seconds.
When the installation is completed, click OK to close the
two dialogs.
