ClearWater Compact Sun Heater 1012
Swim & Fun Scandinavia Aps
–info@swim-‐fun.com
-‐
www.swim-‐fun.com
18
English manual
Content:
The following must be in the box:
1 pcs. sun heater with transparent bowl, two pcs supporting legs to get the right angle towards the sun, 1 pcs. long
hose (1,2 m) to connect the sun heater to the pool, 1 pcs short hose to serial connect more sun heaters, 1 package of
special adapters for bigger Intex pools, 1 set of hose clamps, 1 manual.
Before you install your sun heater
Your pool and pump without sun heater
Your pool and pump with 1 pcs. sun heater ( Install the heater on the
returnlet from the pool , so the water runs thru the heater and back to the pool)
You pool and pump with 2 pcs. sun heater ( Install the heater on the returnlet
from the pool , so the water runs thru the heater sand back to the pool)
This is how the sun heater works:
•
The existing filter pumps of the pool pushes water through the sun heater. Even the smallest filter pumps can
do this, as long as the sun heater is placed on the ground right next to the pool.
•
The sun heater is placed next to the pool facing SOUTH and in an angle of 30 degrees. The two legs on the
sun heater ensure the optimal angle towards the sun.
•
The heat from the sun is concentrated inside the transparent bowl. The bowl works like a ”heat trap” and
heat is transferred continually to the black spiral bottom of the heater through which the water runs.
•
The immediate effect you can feel in the water depends on the current of the water stream. However,
continually heat is transferred to the water.
