ways in which the tool is used dependent
on the following examples and other
variations on how the tool is used:
3.
To be accurate, an estimation of exposure
level in the actual conditions of use
should also take account of all parts of
the operating cycle such as the times
when the tool is switched off and when it
is running idle but not actually doing the
job.
This may significantly reduce the
exposure level over the total working period.
4.
Do not connect the chain saw to mains
before it is completely assembled.
Always
use gloves when handling the chain.
5.
Remove battery pack from chain saw
before servicing.
Severe injury or death
could occur from body contact with moving
chains.
6.
Cutting edges on chains are sharp.
Use
protective gloves when handling chains
Work Area Safety
1.
Keep work area clean and well lit.
Cluttered
or dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power
tools create sparks which may ignite the dust
or fumes.
3.
Keep children and bystanders away while
operating a power tool.
Distractions can
cause you to lose control.
Electrical Safety
1.
Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and
matching outlets will reduce the risk of electric
shock.
2.
Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded.
3.
Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool.
Keep the cord away from heat,
oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock
.
5.
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
6.
If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
Personal Safety
1.
Stay alert, watch what you are doing and
use common sense when operating a
power tool.
Do not use a power tool while
you are tired or under the influence of drugs,
alcohol, or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
2.
Use personal protective equipment.
Always wear eye protection.
Protective
equipment such as dust mask, non-skid safety
shoes, hard hats, or hearing protection used
for appropriate conditions will reduce the risk
of injury.
3.
Prevent unintentional starting.
Ensure the
switch is in the off-position before connecting
to the power source and/or battery pack,
picking up, or carrying the tool. Carrying
power tools with your finger on the switch or
power tools that have been turned on invites
accidents.
4.
Remove any adjusting key or wrench
before turning the power tool on.
A wrench
or a key left attached to a rotating part of the
power tool may increase the risk of injury.
5.
Do not overreach. Keep proper footing and
balance at all times.
This enables better
control of the power tool in unexpected
situations.
6.
Dress properly. Do not wear loose clothing
or jewelry.
Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught by
moving parts.
7.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure that these are connected and
properly used.
Use of dust collection can
reduce dust-related hazards.
Power Tool Use and Care
1.
Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job better
and safer at the rate for which it is designed.
2.
Do not use the power tool if it can’t be
turned on and off by its switch.
Any power
tool that cannot be controlled with the switch
is dangerous and must be repaired.
3.
Disconnect the plug from the power
source and/or the battery pack from the
power tool before making any
adjustments, changing accessories, or
before storing the power tool.
Such
preventive safety measure reduces the risk of
starting the power tool accidentally.
4.
Store idle power tools out of reach of
children and do not allow persons
unfamiliar with the power tool or these
instructions to operate it.
Power tools are
dangerous in the hands of untrained users
.
5.
Maintain the power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
6.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
