manualshive.com logo in svg

SWF MA-6, Руководство пользователя, Страница: 51 / 76

Поделиться
Скачать
SWF MA-6 Скачать руководство пользователя страница 51

ADJUSTING MAJOR PARTS OF THE MACHINE

10

51

Turn OFF the main power when adjusting the machine.

CAUTION

Clean the machine regularly to prevent thread tails clouding around the lower thread holder.
Such may undermine the function of the lower thread holder.

CAUTION

10.1) TRIMMER ADJUSTMENT

10.1.1) Moving Place Position Adjustment 

– The proper position of the moving blade is that the cutting point of the fixed blade should be at the end of the

fixed blade. If the moving blade is not properly positioned, such problems as upper thread separation and cut

skipping could occur.

– If the moving blade is not properly positioned, loosen the fixing screws for the moving blade links (A), (B)

and turn on the power. Then the trimming motor moves to the default point. Place the moving blade at the

end of the fixed blade, and then tightly fasten the fixing screw.  

Movable blade

Fixing screw for moving blade link

Fixed blade

Содержание MA-6













































































Отзывы:

Нет отзывов