8
FB155 / FB240
Bergvägen 7 | SE-341 32 Ljungby | Sweden • Tel +46 (0)372-156 00 | www.swepac.com
1
D
ok
: 101536-
GB 2039
V-belt drive
Check the tension and condition of the V-belt
regularly. Replace a damaged V-belt with a new
type according to the table below.
Machine
designation
V-belt type
FB 155
XPA 990
FB 240
XPA 1107
AFTER STARTING
STOPPING
Switch the throttle lever to idle.
Open the choke gradually.
Run the engine for around 5 minutes.
Switch the engine to idle and let it run for a few
minutes.
Switch the engine power switch to “0”.
Close the fuel cock.
Vibrating element
Check for oil leaks regularly. Seal any leaks. NOTE! the
machine must under no circumstances be operated if
there are any indications of leakage.
Note!
The amount of oil in the vibrating element is
0,5 L.
1. Draining / refilling openings
Rubber dampers
Check the condition of the rubber dampers
regularly.
Replace damaged dampers.
