6
FB 430 / FB 450 / FB 500 / FB 510
D
ok
: 101498D
-GB 2103
FB 450
Net weight .................................445 kg
Base plate, w x l ........................700 x 1080 mm
Speed .........................................approximately 25 m/min
Permitted inclination ................20°
Centrifugal force .......................60,000 N
Vibration frequency ..................72 Hz
Drive engine ..............................Yanmar L 100N
Engine power ............................7 kW
Engine RPM ..............................3000 RPM
Fuel tank volume .......................5.5 liter
Fuel type ....................................Diesel
Hydraulic oil quantity................12 liter
Battery capacity ........................40 Ah
Generator power ........................180 W (15 A)
TECHNICAL DATA
METHOD OF OPERATION FB 450 / FB 510
The machine consists of a base plate with a vibration
element and an upper part cushioned from the base plate.
The cushioning between the base plate and the upper part
consists of four rubber dampers. The upper part, on which
the drive engine is mounted, is also designed as a hydrau-
lic oil tank. The control handle is placed on the upper
part and cushioned with rubber dampers. The vibration
element is driven and the direction of travel is changed by
means of hydraulics. The hydraulic pump, mounted on the
diesel engine, supplies a hydraulic motor on the vibration
element with an oil flow. The vibration element consist
of two shafts on roller bearings with bias weights that are
connected to gear wheels that rotate in opposite directions.
One gear wheel can rotate on its shaft by means of a hy-
draulic cylinder. This changes the mutual phase positions
of the eccentric weights and the direction of travel of the
machine, and the speed is changed infinitely variably.
The
engine is well protected against damage in connection with
use and transportation by a sturdy protective frame with a
protective panel.
FUEL and OIL RECOMMENDATIONS
Fuel ...........................................Diesel
Engine oil ..................................SAE10W-30
Oil quantity, crankcase ..............1,5 liter
Engine oil change diesel engine: first oil change after 50 hours
then every 200 hours of operation. Replace the filter when you change oil.
Hydraulic oil type / quantity FB450 / FB510 ....HydraWay BIO SE 32-68.......12 liter
Hydraulic oil type / quantity FB430 / FB500 .........HydraWay BIO SE 32-
68.............1,6 liter
Replace hydraulic oil filter.....................................................after 3 years
Oil type/quantity, vibration unit........SAE10W-30.........................0,5 liter
FB 510
Net weight .................................500 kg
Base plate, w x l ........................700 x 1080 mm
Speed .........................................approximately 25 m/min
Permitted inclination ................20°
Centrifugal force .......................66,000 N
Vibration frequency ..................72 Hz
Drive engine ..............................Hatz 1D50Z
Engine power ............................7.5 kW
Engine RPM ..............................3000 RPM
Fuel tank volume .......................5.5 liter
Fuel type ....................................Diesel
Hydraulic oil quantity................12 liter
Battery capacity ........................40 Ah
Generator power ........................180 W (15 A)
FB 500
Net weight .................................490 kg
Base plate, w x l ........................700 x 1080 mm
Speed .........................................approximately 25 m/min
Permitted inclination ................20°
Centrifugal force .......................66,000 N
Vibration frequency ..................72 Hz
Drive engine ..............................Hatz 1D50Z
Engine power ............................7.5 kW
Engine RPM ..............................3000 RPM
Fuel tank volume .......................5.5 liter
Fuel type ....................................Diesel
Hydraulic oil quantity................1,6 liter
Battery capacity ........................40 Ah
Generator power ........................180 W (15 A)
METHOD OF OPERATION FB 430 / FB 500
The machine consists of a base plate with a vibration
element and an upper part cushioned from the base plate.
The cushioning between the base plate and the upper part
consists of rubber dampers. The power is transmitted from
the engine to the vibration element via a V-belt which can
be adjusted with a belt tensioner. The engine V-belt pulley
is fitted with an integrated centrifugal clutch, which allows
the engine to be started and run idle without the vibrator
being connected. The engine is well protected against
damage in connection with use and transportation by a
sturdy protective frame with a protective panel.
FB 430
Net weight .................................430 kg
Base plate, w x l ........................700 x 1080 mm
Speed .........................................approximately 25 m/min
Permitted inclination ................20°
Centrifugal force .......................66,000 N
Vibration frequency ..................70 Hz
Drive engine ..............................Yanmar L 100N
Engine power ............................7 kW
Engine RPM ..............................3000 RPM
Fuel tank volume .......................5.5 liter
Fuel type ....................................Diesel
Hydraulic oil quantity................1,6 liter
Battery capacity ........................40 Ah
Generator power ........................180 W (15 A)