swepac F 80A, Руководство пользователя в оригинале

Страница: 7 / 16

7
F 80A
1
2
3
1
2
D
oc: 101516-
GB 1810
DAILY CHECKS
Fuel Check
Check that there is fuel in the tank. Top up if necessary.
Engine Oil Level Check
Check the oil level in the crankcase every day. The oil
must reach the edge of the filling hole when the machine is
on a level surface.
Air Filter Check
The air filter must be checked at least once every working week.
When working in dusty conditions, check daily.
1. Paper element
2. Foam plastic element
Cleaning the air filter
1. Remove the foam plastic element and the
paper element and check that they are
undamaged. Replace damaged parts.
2. Wash the foam plastic element in liquid with
a high flashpoint and let it dry properly. Dip in
engine oil and squeeze dry.
3. Strike the paper element against a hard object
a few times to loosen any dirt.
Oil/Fuel Leakage
Check every day that the engine is not leaking oil
or fuel. If a leak is discovered, the machine may
not be operated until the fault has been remedied.
See also the separate engine instructions!
V-belt Drive
Check the tension and condition of the V-belt regularly.
Adjustment of V-belt tension
Loosen the screws (pos 1) that hold the engine plate.
Loosen the screws (pos 2) holding the cover.
Remove the cover.
Tension the V-belt by pulling the handle on the side of the
engine plate.
Tighten the screws.
Refit the cover.
Rubber Dampers
Check the condition of the rubber dampers (pos 3)
regularly. Replace damaged dampers.
Polyuretan Pad
A polyuretan pad is used for stone paving work to protect
against stones and ground clinker.
Note! Options